Fire Alarm & Detection Systems in Oman
Failed a Civil Defence inspection, or building something new and need it signed off first time? Lyqa Tech Ventures designs, supplies, installs, tests and maintains addressable and conventional fire detection and alarm systems for buildings across Oman – from a single-panel retail unit in Muscat to a multi-loop networked system across a hotel, hospital or warehouse.
We are an Omani-owned technology company registered as an SME, working across Muscat, Sohar, Salalah and Duqm. You get one engineering team accountable for the design, the drawings, the installation, the commissioning and the maintenance that keeps the certificate valid.
When Oman requires a fire alarm system
The authority is the CDAA, not ROP Civil Defence
Many contractor websites in Oman still advertise "ROP Civil Defence approval". That description is out of date, and it matters when you are preparing a submission.
Civil defence was consolidated as the Public Authority for Civil Defence and Ambulance under Royal Decree 3/2013. In 2021, under Royal Decree 39/2021, it was renamed the Civil Defence and Ambulance Authority (CDAA) and became operationally independent of the Royal Oman Police. The CDAA is the authority that reviews building plans, licenses facilities and inspects fire protection systems.
The regulations that apply to your building
Fire prevention and protection requirements for buildings in Oman are set by Decision 77/2002, with Part Two adopted under Decision 16/2008 and Part One amended by Ministerial Decision 234/2019. What your specific building needs depends on its occupancy type, height, floor area and use - a warehouse, a hotel and a clinic are not treated the same way.
Two things follow from this that catch owners out:
Design approval comes before construction, not after. The CDAA reviews drawings for residential, commercial and industrial projects to confirm escape routes, detection and suppression provisions before the project proceeds.
The equipment itself must be conformant. The CDAA issues a certificate of conformity for civil defence equipment, devices and materials. The application requires the product's commercial agency certificate, catalogues and technical specifications, samples, and a third-party technical certificate or certified laboratory report confirming conformity to the approved standards.
In practice that means fire alarm equipment specified for an Omani building should carry recognised third-party approvals - EN 54 series certification (the European product standard series for fire detection and fire alarm equipment, third-party assessed and CE marked), or UL listing - and the installation should follow a recognised installation code such as NFPA 72, which covers application, installation, location, performance, inspection, testing and maintenance.
Where projects usually fail
In our experience the rejection is rarely about the panel. It is about paperwork and detail: missing or non-matching as-built drawings, devices installed in positions that differ from the approved layout, a cause-and-effect matrix that was never written down, uncertified cable, no battery standby calculation, or a system that works but has never been formally tested and recorded.
Fire detection and alarm systems
we install and maintain
Addressable Fire Detection Systems
Every detector, call point and module on the loop carries a unique address, so the panel reports the exact device in alarm or fault, not just a zone. In buildings where speed matters - hotels, hospitals, malls, multi-storey offices, large warehouses - this turns a twenty-minute search into a two-minute one, and also cuts routine servicing costs significantly over the system's life.
Conventional Fire Detection Systems
Devices are wired in zones, so the panel tells you which zone has a fault or alarm, not which device triggered it. For a small shop, workshop, clinic or villa with a handful of zones, this remains a sound, cost-effective choice that keeps installation and maintenance costs low, and it stays fully compliant wherever the building allows a zoned approach.
Voice Evacuation Announcement Systems
Sounders only tell people that something is wrong. Voice evacuation tells them clearly what to do and exactly where to go, which measurably improves how quickly people actually move toward safety. For public buildings across Oman we design evacuation messaging in both Arabic and English, with phased or zonal evacuation built in wherever the building's fire strategy calls for it.
Fire Alarm System Integration
A fire alarm panel that isn't interfaced correctly can put people behind locked doors. We properly coordinate the interfaces: HVAC shutdown, lift homing, door holder release, fail-safe release of access-controlled doors, CCTV triggers, gas suppression and BMS reporting. Because Lyqa Tech also delivers CCTV, access control and networking, these interfaces are engineered in-house, not negotiated between separate subcontractors on site.
Special-risk detection
Not every space suits a standard ceiling detector:
Beam detectors for high-bay warehouses and atriums where a point detector would never see the smoke in time.
Aspirating smoke detection (ASD/VESDA) for server rooms, data halls, switchrooms and archives where the earliest possible warning is the point.
Flame detectors for fuel handling, generator rooms and process areas where fire may develop without much smoke.
Gas detection where combustible or toxic gas risk exists alongside fire risk.
Duct smoke detectors to shut down air handling before it distributes smoke through the building.
Who we work with across Oman
Hotels and hospitality
Warehouses, logistics and industrial
Hospitals and healthcare
Offices, retail and mixed-use
Villas and residential buildings
How a Lyqa Tech fire alarm project runs
Site survey and risk review
we walk the building, record ceiling heights, room use, existing infrastructure and any current system, and identify what the occupancy actually requires.
Design and specification
device layout, zoning, loop design, battery standby calculation, cause-and-effect matrix, cable schedule and bill of materials.
Approvals and submission support
drawings and product documentation prepared for CDAA review; we coordinate with your consultant or main contractor.
Installation
first fix (containment and cabling) and second fix (devices, panel, terminations), sequenced around your operations.
Testing, commissioning and handover
every device tested and recorded, cause-and-effect proven end to end, as-built drawings, O&M manual, logbook and operator training for your team.
Maintenance
a scheduled AMC that keeps the system, the records and the certificate current.
Request a fire alarm site survey
Tell us the building type, approximate floor area and whether you have an existing system, and we will tell you what your building actually needs before we quote anything.
What drives the cost of a fire alarm system in Oman
We do not publish fixed prices, because a real number depends on your building. These are the eight variables that actually move it:
Detection philosophy - conventional, addressable, or addressable with special-risk detection.
Device count and loop count - driven by floor area, compartmentation, ceiling height and room use, not by building size alone.
Cabling and containment - fire-rated cable, conduit or tray, and how much of the route is accessible. Retrofitting into an occupied, finished building costs considerably more than first-fix during construction.
Evacuation strategy - sounders versus a full voice evacuation system with amplifiers and speaker zones.
Integration scope - every interface to HVAC, lifts, doors, access control, suppression or BMS adds engineering and commissioning time.
Documentation and approvals - drawing production, submission support and re-inspection attendance.
Designing for Omani conditions
Salalah, the khareef and coastal humidity
Salalah, the khareef and coastal humidity
Sohar, Duqm and industrial duty
Heat and airborne dust
Why Choose Lyqa Tech Ventures For Fire Alarm Detection Systems Oman
Omani-owned, Muscat-based, SME-registered - with the standing that carries in government tenders and national initiatives.
Systems integrator, not a box supplier - fire detection is engineered alongside CCTV Cameras, access control, networks and telecoms, so interfaces work on day one.
Vendor-agnostic - we specify what the building and the authority require, not what we hold in stock.
One accountable team from survey to AMC, so nobody is between you and a working system.
Service areas
We deliver and support fire detection and alarm systems across Muscat (head office, Bousher), Sohar, Salalah and Duqm, including port, freezone and SEZAD facilities.
Our Clients
Frequently Asked Questions
What types of access control systems do you offer?
We provide biometric, RFID card, keypad, mobile app-based access systems, and integrated gate barriers designed for residential, commercial, and enterprise security.
Can your access control systems be integrated with CCTV and alarms?
Yes! Our solutions support full integration with CCTV cameras, alarm systems, and building management systems, giving you centralized control and monitoring.
Do you offer solutions for multiple locations or large enterprises?
Absolutely. We design scalable access control systems that manage multiple entry points and branches across cities or regions, ideal for large organizations.
How secure and reliable are your systems?
We use top international brands such as Hikvision, ZKT, Dahua, and BFT to deliver encrypted, tamper-proof, and reliable access control solutions.
